CONSPIRACY ALERT -- The BOP/Well were destroyed with RIG. BP & USgov lying about Well-head & BOP being cemented on the seafloor.

PAY ATTENTION TO THIS VIDEO-CLIP

Watch at 2:45 marker.

The BOP must be installed before the drilling begins.

At sea this BOP would HAVE TO BE on the RIG.

There would be no way of controlling the flow of oil without Well-head and its BOP.

If anyone believes that the BOP & Well are set on the seafloor first and are not securely fastened on the RIG before drilling, tell me how did BP fasten the BOP/Well on the sea floor before the drilling?

The BOP was on the RIG.

The question that arises now is, why is BP & the US government lying about the Well-head and BOP being cemented on the seafloor gushing out oil AS SEEN ON TV when the BOP/Well were destroyed with the RIG?

CONSPIRACY ALERT -- CONSPIRACY ALERT -- CONSPIRACY ALERT

The BOP must be installed before the drilling begins

It was installed before the drilling began,

N time now, gotta see my son in proson,

Capiche?

No it wasn't.

You're just a shill trying to lead others away from the Truth.

Good work OP

you have got to be kidding me, this guy got pinned, this take GLP to a new low.

you have got to be kidding me, this guy got pinned, this take GLP to a new low.

Dispute the content of the OP

Good work OP

The only way to control the flow of oil is to have a functioning BOP in place before drilling.

The pressure of this oil spill AS SEEN ON TV would be same upon striking it initially.

You would need a functioning BOP to be SECURELY fastened BEFORE drilling -- This could only be possible if the BOP is fasten on the RIG platform, either-wise please explain how they SECURED the BOP on the seabed before drilling?

Your head will hurt due to the idiotic notion your fairytale mind will be trying to fantasize.

Your whole education is one BIG fairytale.

Your whole life is one BIG lie.

Go on. You won't be able to think of a correct response.

I DARE YOU!

Please explain how they SECURED the BOP on the seabed before drilling?

That is all.

The only way to control the flow of oil is to have a functioning BOP in place before drilling.

The pressure of this oil spill AS SEEN ON TV would be same upon striking it initially.

You would need a functioning BOP to be SECURELY fastened BEFORE drilling, please explain how they SECURED the BOP on the seabed before drilling?

The only way to control the flow of oil is to have a functioning BOP in place before drilling.

The pressure of this oil spill AS SEEN ON TV would be same upon striking it initially.

You would need a functioning BOP to be SECURELY fastened BEFORE drilling -- This could only be possible if the BOP is fasten on the RIG platform, either-wise please explain how they SECURED the BOP on the seabed before drilling?

Your head will hurt due to the idiotic notion your fairytale mind will be trying to fantasize.

Your whole education is one BIG fairytale.

Your whole life is one BIG lie.

Go on. You won't be able to think of a correct response.

I DARE YOU!




hey op,

your first post seemed reasonable so I thought I'd ask an expert.

There is no point trying to explain to OP, hes an attention seeker, he just dribbles shit
My business partner retired fromt the oil industry after 45 yrs with the last 20 yrs as executive over exploration in aver 20 countries, drilling hundreds of wells in the last 20 yrs.

I posed your theory to him just prior to writing this response.

his response was simple.

The bop was installed at the floor on a template which is bolted onto the sea floor with robotics. It is the only way they install the primary bop...and always, of course, BEFORE DRILLING.

He gave me all of the fine details of how the casing goes through the bop and how the riser extends from the template...etc etc. etc...but I had no desire to take it all down.

He then said that many times secondary and terciery bop's are installed above the primary floor bop.

he said the extreme burst of pressure destroyed the mechanical function of the bop which now prevents it from being turned off.

he said that drilling multiple wells around it will relieve the pressure which will then allow the repair of the bop.



sorry OP, and all of you conspiracy lovers.

he said visit the site nov.com for details on the bop's used in this application.

i haven't gone to that site..this doesn't interest me enough...but you might want to check it out.