|
REPORT COPYRIGHT VIOLATION IN REPLY
|
|
Message Subject
|
THE PRIMAL ENERGY GRID ...THE MISSING ANCIENT LINK OF HUMANITY...
|
|
Poster Handle
|
oRbZ |
|
Post Content
|
For anyone else building a pyramid here is a link to some good connectors. [ link to copperpyramids.net] They are at the correct angles matching the Giza pyramid. That makes it easy for people to construct one. Those angles are great...Thanks for posting. Should be no excuses for people to construct one now. the information is all there. I'll search for the right dimensions from the great pyramid, and down size them. The dimensions are on that site...but to be shore there right, I'll check them. I'd like to build a pyramid with the connectors--I'm still not sure about the crystal and wire placement-- A photo would be helpful. I remember you said that the crystal can point up or down. Does it go in the tubing? Will it work if on a smaller one it is outside? Does the copper coil go inside the tubing? How to insert it and coil it and clockwise and counter clockwise--which one? Would you use 4 crystals--one in each side? At the top or near the top? Funny, I bought a copper pyramid --about 3 or 4 feet when I was around 16--like 35 years ago, everyone that knew about it thought I was nuts--I remember I got it because I'd read it was good for water, plants, meditating...I have no idea what happened to it. I really like the idea of one that can be taken apart (for a larger one)--I'd like to sit outside under it--and some smaller ones for in the house. Thanks again for this timely information --I just want to get the instructions right before I build. I am putting 8 of these inside each pipe connected by copper wire. [ link to www.healingcrystals.com] With 1 of these at each of the 4 corners. [ link to www.healingcrystals.com] And a big 5 to 7 inch or bigger one on top. I will wrap the crystals in copper wire in a spiral, am hoping to be able to connect it (the wire) all so the weight of the big crystal will pull the wire taught from the top, once I put it on paper will scan the diagram and post if you like. Hope that helps a little just to give you an idea.
|
|
|
Please verify you're human:
|
|
|
Reason for copyright violation:
|
