To the skeptics..

Like myself and the OP who were out to disprove.

Get one of these.

[link to www.lessemf.com]

A radio-frequency/microwave meter and do some testing yourself as I did. I needed measurable hard data, no he said, she said bullcrap.

Take some readings of a cell tower near you. Get within 100 yards if you can. Take some more readings, different days. Then throw a muffin pan size piece near it and take some readings. I've found it take 20-30 minutes to take effect. Try it on another tower, then another. You'll see. heh. I've been making them ever since.

Now I did this 10 years ago and don't remember the exact readings, but it was significantly noticeable for me anyways.

I also would advise caution and advise research into Reich's work and maybe Don Croft's research before getting into it, as it can be really bad for you, even deadly.

The generators are great. The accumulators in the wrong hands can be bad.

The typical resin/metal/crystal moldings are fine, they are generators, and this is the most common type. In fact if you buy some pieces online, they are most likely going to be generators.

What Reich used was accumulators and they had to be discharged/cleansed properly, because of the DOR buildup.

Generators seem to transmute and can force negative energy away from their environment.

Accumulators clean the environment by drawing all the negative energy in. That's why they must be handled carefully.

From my own observations, I would advise against too much copper! A coil or two, or maybe a crystal coiled in copper is fine, but say all copper bb's in a tb might act as part accumulator or the energy is too harsh. Any metal should work, and copper is a metal, but to me, maybe copper is too much, too conductive of a metal. It feels different anyways. I use the zinc coated bb's with fewer copper ones, like a 60/40 or 70/30 mix and it seems fine then.

Alot of people like aluminum shavings because they're light and bb's are heavy, but bb's can be easier to come by and cleaner to work with.

As far as crystals go, depends on your mold. I like non-stick muffin pans, so they gotta be less than an inch. They don't need to be pretty or even whole six-sided pieces, they can be little broken shards for tower-busting. And I don't think up-down, left-right orientation matters. And I do try to put intent into the crystals as I make them, I figure we can store info on man-made silicon in our computers, so it can't hurt huh. And I don't make it unless I'm in a good mood.

Now, when it comes to affecting people, haha, woah. Get ready brother, hang on son, lol. Like one poster said, it doesn't discriminate. If you have some strong repressed negative emotions deep down, which, if ya ask me, most people do, oh boy.

And if you know someone that's having nightmares or freaking over some negative being or energy in their home and you want to give them some. IF, you give them some, tell them its gonna take 3 days and its gonna get worse, much worse, before it gets better. Trust me. Whatever is bothering them will get pissed, real pissed when orgonite is introduced. But after about 3 days they have no choice but to move on. So tell them to hang in there if they really want it over/gone. The nightmares or whatever will get worse, but then it's done for good. Alot of people will think it is making things worse at first and want to get rid of it, but hang in there.

Like I said I was a skeptic, but alas, it's turned out to be pretty amazing in my observations.