If you're serious about 9/11 please read and watch the videos above

Typical erred 9/11 assumptions and arguments and errors:

ERROR #1 Thermite / thermate can be activated by fire, when the planes exploded upon impact it would have activated any Thermite charges and collapsed the towers right away, THERE WAS NO THERMITE IN THE TOWERS. The molten steel is from the fire without Thermite involvement.

My Response: First of all thermite will not melt steel accurately enough for demolition purposes unless it is in a compressed shaped charge format to direct the cutting of the steel. This means the cutter charges are sealed with a higher temperature backing support made of material that can survive ignition of the charge and direct the cutting to the steel. The electronic firing caps require great heat to set off the charge. However I do agree the fire temps were high enough to do this. However the fire would have only affected those charges directly exposed to the extreme heat. The rest of them would not have gone off. The molten steel is from the charges affected by the fire. No structural building has ever collapsed in 100 years due to fire, even fires that burned for 18-24 hours. Also in that same 100 year history, never has molten steel ever been found in the basements of any structural steel building that has burned by fire. Yet it was found in all three of the buildings on 9/11. The only thing that could cause this molten steel is Thermite, the only thing that could cause molten steel to come out of the tower before its collapse is Thermite. Anyone who ignores and argues such ridiculous points and the ignores the documented history and facts are either part of the conspiracy disinformation hackers, or they are some of the most uneducated or gullible people on earth.



The video above focuses on the fire, the molten steel for 3 weeks in the basements of all three buildings and molten steel coming from the window before the collapse. Only a dislodged Thermite pre-demolition cutter charge that was still operational could cause molten steel to come out of the window. It was one of the bloopers of the 9/11 planners that failed for those smart enough to understand what they are looking at, when they see the molten steel pouring out the window. It is the 9/11 smoking gun. Unpressurized Jet fuel burns at about 800 degrees. That's it 800 degrees tops, yet it takes 1600 degrees to melt steel. Watch the video at the top for more information. After you watch the 9/11 video at the top ask yourself then answer to yourself the following questions.

Question 1: What is causing the molten steel to pour out the window of the towers shown in the first minute in the video above?

Question 2: At what temperature does industrial grade structural steel melt?

Question 3: What is the highest temperature possible for Jet fuel?

Now for those that just want facts remember the following. The facts for question 2 & 3 can be answered by any structural engineering or industrial welding corporation you call. These facts will be the same if you look for them in the 1960's, 70's *80's or 2011. Why, because the facts of question 2 and 3 have existed and been known since the 1940's. Steel temperature melting points is a science that has been studied since ancient times. In the last century it has become nearly a perfect science. So the facts about when steel melts at different grades is absolute depending on the grade of steel.

Once you have those facts then you will know for sure that there was nothing in the towers that could burn hot enough to cause molten steel to pour out of the tower. Once you know these facts then it is just a process of elimination and logic on what was melting the steel in the towers. That should make it much easier to determine what possible things exist in the world that could cause molten steel to pour out while the tower is still standing. The facts for Question #2 and #3 are not open to debate, they are known and have been known and accepted as facts longer than you and I have been alive. So focus on the facts, not all the other disinformation. Then from there work yourself through the other questions.

The people responsible for 9/11 want you to wear yourself out and to get lost in all the other theories so you do not focus on the absolute facts that are already known about metals melting points. All the proof you need is right here in and the video at the top. If you don't understand this, then any other research on 9/11 would be pointless. Stick with the facts that cannot be ruled out by anyone no matter how many other points of view are presented.

Metal's melting point are are well known fact and a true science that has been known in the modern age for most metals for over 100 years. Jet fuel temperatures are well known for the last fifty years. The history of structural steel buildings collapsing due to fire for the last 100 years is also well known, none had ever collapsed before 9/11 and none has collapsed since 9/11. These are the facts not speculation. However I do have a speculation as well. You will find that below the skyscraper fire history that follows.