ANY APPLIANCE REPAIR PEOPLE HERE? QUESTION ABOUT DRYERS

Natural gas or propane?

Natural gas.

is it a gas dryer? or you just stupid?

no but i'm a bicycle repairman.

Well it should be between inches & blowtorch if that make sence like light blowtorch.

Never put a living thing in the dryer.

How long is the burner?

Should run full length...blue flame (cleanest)
It actually runs a manifold if Im not mistaken so flames may even lick that enclosure

Was the dryer purchased for natural gas? Some dryers need to be converted to gas type.

True...LPG and Nat use different size burning orifices

You should not be able to see the flame it should be burning inside a can like tube near the fan that blows the heat into the dryer

Are you referring to the metal tube the flame is in? If so, the flame goes all the way to the back. Repairman was already here twice but the flame used to be much shorter. Just checking to see which is the proper length.

Proper length is the length of the burner.....

Thank you for your replies.

Sure :)...If it appears to have gas holes that dont burn...turn off gasola wire brush burner lightly...vacuum and try again :)
Clean thermocouple if it has one looks like a rifle bullet witha wire in its ass LOL

Make sure the gas is off and blow in the burn space to dissipate any gas...get a fan at a distance open a window.

Just dont go BOOM

The flame appears to burn clean, just wasn't sure about the length. Searched a few DIY repair sites but couldn't find any answers. Thanks again for your help.

You sound good. Nite