>>>SILVER ION has the proven ability to cause any HUMAN CELL to revert back to a STEM CELL!!<<<

have a look at some of becker's patents in these links, the info is there. ionic silver water is the easiest approach, look for abeland's site for more on that.

Now I finally see where the GLP traffic to my " [link to theartofmakingcolloidalsilver.com (secure)] is coming from. It is this thread. I've been searching for " colloidal silver," and the thread doesn't appear.
I have now read all the posts. I can see why the thread has generated such a great deal of interest. There's nothing like pain to focus one's attention. I am studying Dr. BECKER's patents regarding Silver iontophoresis. At the time of his application, 1998, the accepted method of making colloidal silver was still " 3 9 volt batteries and a pinch of salt. We have come a long way since then.

Over six years ago, I started a thread on a forum called goldismoney2. It is a forum created by people who believe in investing in Precious Metals. It is unique in the fact of not allowing any commercial content whatsoever. Any advertising or product promotion is strictly forbidden. It is well moderated and allows complete freedom of expression for the members. As long as the members do not engage in really obnoxious behavior, members can express themselves freely. I chose this forum as it was the only one I could find that had a section concerning Alternative Health topics, including colloidal silver. There was no other place to get honest information about colloidal silver.
[link to theartofmakingcolloidalsilver.com (secure)]
The development of the " Ultra" generator and its ability to produce a clear ionic 50 PPM stable product could significantly improve the application of the process.

Last Edited by abeland1 on 11/21/2022 08:08 AM

[link to sfamjournals.onlinelibrary.wiley.com (secure)]
Wound healing and bone regeneration
It was way back in 1970s that electrically generated silver ions were used for the first time to treat severe cases of antibiotic-resistant osteomyelitis, a bone infection that causes large wounds in the flesh. In this study, silver ions were directly generated into open infected wounds through the use of a small, battery operated colloidal silver generator operating at 0·9 volts. It was observed that the silver effectively killed the disease causing micro-organisms and also triggered regrowth of human tissue and bone at the site of the infection. Electrically generated silver ions not only killed the pathogens and healed the infection but also stimulated tissue and bone regrowth (Becker 2000).

In a later study by the authors, local tissue regeneration in humans was induced using patient's own cells at the desired site which could be caused to de-differentiate into the required embryonic stem cells. Silver ions were generated directly into the human body by passing a tiny electrical microcurrent through surgically implanted silver rods or silver mesh. These silver ions could stimulate wound healing and tissue regeneration by killing infections and triggering a process called cellular dedifferentiation (Becker 2002). The process of silver-assisted wound healing by means of cellular dedifferentiation is explained as follows (Fig. 4). When silver ions come in contact with the wound bed, they combine with proteins, peptides and other chemical species normally present in the tissues. After all the available sites are saturated with binding of silver ions, the antibacterial action of silver begins at about 20–30 min following the exposure of bacteria to the ions. The next reaction is an association between the silver ions and sensitive cells present in the wound such as mature fibroblast and epithelial cells, resulting in dedifferentiation of these cells into embryonic cell types capable of redifferentiation into other cell types. Production of dedifferentiated fibroblasts requires a continuous supply of excess silver ions for at least 48–72 h following saturation of the active chemical sites in the previous reaction. If sufficient silver ions are made available, a third reaction begins to take place. This constitutes a specific physical association of at least some of the silver ions with the collagen fibres present in the wound to produce a unique structure called as silver-collagen complex having the specific properties required to induce activation of the dedifferentiated fibroblast cells previously produced. After this, an adequate blastema is formed in the tissue which supports regeneration and wound repair by the process of redifferentiation of blastema into the required cell types (Becker et al. 1998). Electrically generated silver ions were reported to kill numerous forms of infectious micro-organisms. For example, Providencia stuartii, a burn wound isolate which was resistant to all antibiotics except amikacin, was susceptible to electrically generated silver with a minimum bactericidal concentration of 0·73 g ml&#8722;1. Oligodynamic Ag+ was found to be 10–100 times superior to silver sulfadiazine in case of both Gram-positive and Gram-negative pathogens in terms of achieving the minimal lethal dose (Berger et al. 1976b).

Many of us tried every conceivable method of stirring to allow the use of a higher current to speed up the process. All of my efforts in this direction failed.

My quick rejection of the use of a bubbler was based on my experiments convincing me that any form of stirring resulted in a larger average particle size.
h
The CSG1 generator that you have does not have automatic polarity reversal. That is why you need to stir it once in a while. If you don't switch the polarity or stir it, discharged silver particles will collect on the cathode. Some of these will break off and be carried upward by the hydrogen bubbles to the surface. If enough of these collect at the surface, they can even short out the two electrodes, stopping the process. No harm will be done to the CSG1 because the current is limited by both the resistor and the LED lamp. I designed the device with the LED and gave instructions for users to give the whole assembly a nudge when the LED reaches a certain brightness. All they have to do is nudge the thing and when doing so observe the fact that the LED decreases in brightness because the current will be reduced. The electrodes leaving the established channel of ions will indicate that the ions are still concentrated in the ion channel between the electrodes, therefore maximum ionic content had not yet been achieved. An occasional stir with a kabob skewer is a much better method than a constant stirring causing a chaotic condition in the Nernst diffusion area, resulting in the collision and agglomeration of silver ions. In the case of a bubbler system, the current between the electrodes will be completely interrupted, open circuit, while there is a bubble of air between the electrodes.
The answer is a sophisticated method of periodically reversing the polarity. This would have to be under the control of a microprocessor and take into consideration a number of factors. I am working on this.

Last Edited by abeland1 on 11/21/2022 07:43 PM

glad the thread has been sending hits your way, abeland. it is indeed a splendid thread; as i've said earlier herein, i knew of CS as a way to heal infection, but it was a combination of a bad burn and this thread that led me to understand that it has a vital role in wound healing, too. having seen CS in action on that burn, i've used the word miraculous to characterise its efficacy. the only limit i've discovered is that it has to be used on a fresh wound; i've got on old injury that's long since healed, but has left scarring and internal damage, and despite my best efforts (using CS as a cream, which i learnt how to do from your post on the GiM2 thread), it hasn't helped. but on the whole it is amazing stuff; did you know, in addition to all of its benefits for human health, it promotes extra rooting in plants? my 0 - 2 year old saplings are all benefiting from being watered with some CS now, too. also CS helped me recover from covid a few weeks ago. as i've said before, i think this one substance alone could replace at least half of big pharma's medecines, if more people knew about it.

[imgur] [link to imgur.com (secure)]
[link to www.enveacres.com]

Last Edited by abeland1 on 11/21/2022 07:44 PM

Because they can't make money on it and it has no side effects.

They live for slide effects...see CV19

And money and lots more.

The link above leads to a very well written sales pitch for a silver generator selling for $250 that is probably the worst example of exploiting a lack of knowledge of the consumer. It is a " bubbler system".
Here is my comment:
"It has been some 30 years since I began suggesting the use of current limiting and a laser pointer in making colloidal silver. Before that time, the accepted method was using two silver coins, three nine-volt batteries, and a dash of salt. A watchful eye to stop the process when it had a yellow tint was essential. The trick was to stop the process before the water turned into black gunk. At this time, a man who claimed he was a retired oncologist selling vitamin supplements introduced the use of a fish tank bubbler. That worked to the extent that it prevented the runaway condition that caused the three nine volts' problems. Electricity cannot flow through an air bubble, so the current path was repeatedly interrupted by the flow of bubbles between the electrodes. This guy became very popular and sold many people a kind of subscription for vitamins and made some money. I understand that he was later arrested and jailed for mail fraud. This method is still prevalent as it does work, at least to the extent of preventing the rapid formation of black sludge. To give him credit, I think he also told people not to use salt. This method was not as quick as the three nine volts, which meant that it took more time, but people didn't mind so much because they could always watch the bubbles.
There is a problem with this. As there is no current limiting device, i.e., "resistor" in the circuit, the current between bubbles will not be limited. The particles leaving the silver anode will be in relatively large chunks. The scattering effect of coherent light causes the laser line formed in the solution. The amount of light reflected is not directly proportional to the size of the particle. For instance, a particle 10 nm in size will only reflect 1/1000 the amount of light as a particle 100 nm in size. Therefore, using this method to determine when to stop the process will cause the process to end when a relatively small number of relatively large particles are in solution, which is just the opposite of what we want.
I hope everyone keeps experimenting and keeps an open mind on improving the process. Those of you who are using bubblers and have a TDS meter would do well to check whether or not the bubblers are adding oxygen to your water, yielding you a false indication of silver PPM. To do this, run your bubbler for the same length of time without silver. Take a reading of ppm. It is from carbon dioxide and oxygen."
Don't buy the generator from anyone who does not firmly state what you can expect in terms of ionic PPM (as measured by EC or TDS meter) and clear. You need to make the best possible colloidal silver, not just enjoy a a nice story.

Last Edited by abeland1 on 11/21/2022 07:45 PM

nice. i've done similar experiments at home, good to see it documented elsewhere. what i think is ptentially quite interesting regarding improved root growth in plants is that the tips of the roots share a lot in common with neurons:

Recent surprising similarities between plant cells and neurons [link to www.ncbi.nlm.nih.gov (secure)]
From Nerve Roots to Plant Roots [link to www.nih.gov (secure)]

which could certainly lead to some interesting speculation as to how ionic silver might benefit the human brain.

and yes. abeland's [link to www.theartofmakingcolloidalsilver.com (secure)] contains all the info you need to make your own, high quality CS. once you have the basic kit (costs something like 50 - 100 dollars), you can make a litre for 25 cents.

i've used CS on my pets, too. very good for any infection.

Make your own silver generator

all you need are these 5 items:


1 silver coin

2 copper wires

1 battery 9 volt

1 glass

Tap water - (distilled if your a purist)


THATS IT!


A child can do this.

As a younger person, I placed a high value on having easy access to an extensive library. When I became interested in something, I wanted to dive deeply into the subject to the limits of my ability. Now we have the Internet, which can be compared to a vast library. We must continuously be aware of one significant difference. The library of the old consisted of books that had been published and printed. To be posted and printed, they would have been vetted by at least the publishers.

That is not the case of what you find on the Internet. There is a great deal of information that consists of thinly concealed infomercials, gibberish, and downright dangerous instructions on how to make colloidal silver.

If you have been researching colloidal silver, you have likely concluded that it is best to make your own. Many people try the 3 9 volt method to do this at a low cost, which is wildly unpredictable in its results. Here is a device of elegant simplicity that will reliably produce colloidal silver of quality equal or better to what is commercially available.
Let’s take the CSG one out for a ride
We have purchased our distilled water and we’re going to measure it with a lab quality conductance meter. We confirm that it is distilled and measures 1.4 microsiemens. An increase in the microsiemens reading as we progress will indicate directly the parts per million (ppm) value of the electrically isolated silver (EIS) that we have made.

https://imgur.com/a/hhAgqvW

https://imgur.com/a/zZqqPbI

https://imgur.com/a/e3Y2AFG

2 pieces of 4-inch 12 gauge pure 9999 silver wire
1 piece of scrubbing pad (to clean the silver wires)
1 Atlasnova red laser pointer (no batteries)
Please note that the color of the body of the red laser pointer will vary depending on what’s available in our stock.
To complete the parts and equipment in making colloidal silver using our CSG-1, you need to purchase the following:
1 9-volt battery
Distilled water
2 AAA batteries for the red laser pointer
Clean 12-ounce clear glass

You will receive your generator as shown in the picture below:

https://imgur.com/a/17dakwt

After you have bought 1 nine-volt battery and distilled water, all you need to do is
connect the nine-volt battery to the battery connector, as shown below.

https://imgur.com/a/HJHYlkK

Pour distilled water into a clean 12-ounce clear glass. Do not fill your glass beyond 1
inch below the top of the glass.

https://imgur.com/a/CsKaMvQ

https://imgur.com/a/q7NoSpX

Place the generator on the rim of the glass as shown in the picture. Make sure that the silver wires are not touching each other. Position the printed circuit board (generator) on the rim of the glass in such a way that the ends of the silver wires in the water are near the center of the water, and keep the silver wires at least 1 inch away from any glass surface in the water. Also, make sure that any part of the generator (printed circuit board)is not touching the water.
We can see that the LED is only faintly glowing. If it glows any brighter than this, it would indicate that the water we are using is not of the purity required for making colloidal silver. Note that we have taken this picture in very bright light.

https://imgur.com/a/oPZumj9

In this picture, we have turned all our lights off and because of this it is much easier to see the LED’s brightness.

https://imgur.com/a/U8v50jD

It is now a bit more than two hours later and we can see that the LED is glowing much
brighter, indicating that we are running a much higher current than when we started. This indicates that we have generated enough ions to increase the conductivity of the water.

https://imgur.com/a/LTw2KUU

[link to theartofmakingcolloidalsilver.com (secure)]

To check if we are done with the process, place your finger on the generator and gently move the position of the wires, as shown in the picture above. Observe the change, if any, in the brightness of the LED. If the LED dims noticeably when we moved the wires in the water, we are not finished.
It is important to gently move the position of your generator the when you see the red LED glowing brighter during the process.

In this picture we can see that the LED is much less bright after we have moved the position of the silver wires.

https://imgur.com/W1deJ0L

This is confirmed by measuring the PPM of the water in the glass. It reads slightly over
two PPM. So we continue the process.

https://imgur.com/oM1Y6gp

We are now 3 hours into the process, our conductivity meter reads 5 PPM, and we
continue the process.

https://imgur.com/tB2okHg

We are now five hours into the process and we can see that the LED is once again at full brightness. At this time, we will once again do the finger test. We observe that the LED’s brightness remains the same when we press on the generator. This means that we have achieved well over 10 PPM strength of colloidal silver. Please note that your process could be less than 5 hours depending on the quality of your distilled water.
[/imgur] [link to imgur.com (secure)]
Remove the generator from the water and clean the silver wire with a green scouring pad supplied. Two or three swipes should be sufficient.

We confirm this with the use of our electrical conductivity meter. It reads 15.1 PPM.

We now use our red laser pointer included with the kit to confirm the fact that we have made actual particles as well as the ions that are measured by an electrical conductivity meter. If we include the particles in our measurement, which are not shown by conductivity, the true PPM would be 17 to 18 in parts per 1,000,000.

In the days before good laser pointers were available; the only way we had to ensure that we had made larger particles was for the water to turn yellow. You will find many people who still believe that Colloidal Silver should be yellow because of this. The fact is that a yellow color Colloidal Silver indicates particles over 40 nanometers in size. Clear color, like water, means smaller particles. Small particles are better. Some people refer to silver particles this small as nanosilver.
Filter the colloidal silver to remove any large particles that may have formed. A coffee maker filter of the unbleached variety is perfect for this.
We now have 12 ounces of better colloidal silver than can be purchased at a store. We can do this hundreds of times before we have to buy more silver wire.

Last Edited by abeland1 on 01/27/2024 09:03 AM

Is that the same as silver ion?

The system shown above is making relatively little ionic silver. At a rate of one PPM per minute ions are combining and discharging at the anode and forming large particles. It will still be colloidal silver, but not ionic. The relatively large particles will cause it to have a yellow tinge. Ionic silver will be clear and stable. The incandescent bulb is preventing the runaway problem but is still allowing way too much current to flow. If you want to make ionic silver, you have to allow time for the ions to make their way through the diffusion area. The CSG 1 takes from 3 to 5 HRS to make 10 to 15 PPM clear and ionic colloidal silver.

some relevant physics:

[link to theartofmakingcolloidalsilver.com (secure)]

If in a pinch, this would make very weak concentration ionic silver, maybe 5ppm at best before producing a shit ton of silver oxide. Its best to buy a machine that has been specifically designed for the purpose that can constantly measure the conductivity of the solution as well as swap polarities of the electrodes to keep silver oxide production to a minimum.

You mean something like this? This one sets a whole new standard at 50 PPM ionic, clear and stable.

https://imgur.com/a/3OT13lv

[link to theartofmakingcolloidalsilver.com (secure)]

No, like a real kit such as silverlungs.

https://imgur.com/UsokEcB

https://imgur.com/UqvxkgO

The above shows a post that I made six years ago when the ultra generator was still in development. I was so pleased with the fact that I had broken the so-called " 25 PPM ionic barrier" that I felt I had to share this with my friends at goldismoney2.
If any other generator on the market could produce an ionic 50 PPM product, I think that we would all have heard about it by now.

Last Edited by abeland1 on 01/27/2024 09:19 AM