QEG-Quantum Energy Generator

People who are from canada should visit this website

[link to qegcanada.ca]

Look at this beauty

[link to www.facebook.com (secure)]

QEG Overunity:



[link to www.youtube.com (secure)]

Labas lietuvoje panevezyeje baxuriukas surinko pats dar nemaciau turiu tik info
siuo metu vilniuje jieskome budu atkartoti QEG generatoriu
junkis kiesk visu [link to be-do.com]
cekai kolkas vieninteliai siulo isigyti detale coil uz 3.8 euro

Do you by chance live in Panevezys and use Google Chrome?

Not in Panevezys , but Im using google chrome

I can see your Zebra stripes.

Makes sense thank you for making the thread, I will pass it to some they are into the design and making of the parts. They are engineers I think they would love to play with this.

If you are not being paid to perpetrate this fraud, you should ask for your cut.

In the mean time, do a little research and learn about calculation power:

[link to www.allaboutcircuits.com]
[link to www.allaboutcircuits.com]
[link to www.allaboutcircuits.com]

Don't forget that cosine of the phase angle, its a doozy!!


Now on narrative #4.

In narrative order:
1. Output of 240v 42 amps 60hz (from manual 03-25-2014).
2. Output of 2000v 5 amps 400hz (from Taiwan interviews starting @4:40 [link to www.youtube.com] notice James said "if")
3. Output of 1400v lower amps due to not over unity yet 200hz, and may need an aerial? (Morocco)
4. Output to be supplemented with a transverter to draw power from reactivity of the primary coil (to be done in United Kingdom [link to hopegirl2012.wordpress.com]

Note that in narrative #1 the quantum exciter coil's function was "to provide a conduction path through the quantum field (zero point) into the
generator core." - page 2 [link to hopegirl2012.files.wordpress.com]

Equally note the exciter coil was not used in Morocco from where the variations of over unity were said to been measured.
Report: [link to hopegirl2012.files.wordpress.com (secure)]
- section 3.1.1, "the exciter circuit had not yet been included"
- section 3.1.2 table 7, Exciter coil No for primary coil and No for secondary coil
- section 3.2.1, "At this stage the system was tested without the exciter coil" That test result reported as Reactive Power of 22.8kVAR pk-pk / 2050kVAR RMS



An example of using real measurements incorrectly to result in false calculations is the ubiquitous 120v 100 watt light bulb. In the image linked below, this is the standard signal for a 100W bulb. Its calculated to around 780 watts when incorrectly multiplying peak-to-peak volts and amps.

[link to i.imgur.com]

!!!!I GOT OVER UNITY!!!!

Thousands of people downloading a file is nothing special. Show us these thousands of people doing test.
Yes, a few forums are out there, be-do, overunity, energetic, and a couple of german forums. Had you followed up and read these forums you would see but a hand full of people are doing test. You would also see none of these hand full of people have reach the famed over unity. Also if you had real genuine interest and read a small percent of the thousands of post in those forums you would have learned by now the power output is very low when correctly calculated (17 to 35%) and this is shown specifically in the reports released by the qeg team (mainly James Robitaille) themselves.

You would also have noticed qeg is but one of a hundred devices being tested on the forums.

You placed quit a few youtube links here saying they are qeg testing. For the testing of qeg effect of user gotoluc (Luc Choquette), the output is dismal. Gotoluc has public stated he has stopped because due to unworthy results. Quoting from this upload "until I see real power measurements on the QEG I'm not going to put any money in developing something that has not been proven. I'll put my time and efforts in what I see has most potential." - [link to www.youtube.com] But please continue to use such a copy-n-paste no thinking video link to support your cause.


Yes, a lot of people are interested in building qeg. Same for bedini circuits, same for Tesla coils, same for joule thief led illuminators, same for pic controllers, same for arduino circuits, same for the countless other electrical and electro-mechanical devices. Quit with the generalities.


Look at this beauty? [link to www.facebook.com (secure)]
That is a chunk of metal. Not even a well made chuck of metal. Sure its many laminated pieces put together, so what. Millions of transformers all over the world are laminated piece of metal put together, from the size of a quarter to that of a bus. Which by the way most laminated cores are so neatly and smoothly done you can barely see the lamination stack with your eyes and can barely feel the plate gaps with your fingers. Why is the rough edged unevenly sized lamination core you linked a beauty?


Overunity? Are you just another copy-n-paster stark believer? The video below did not demonstrate over unity. The bulbs are not fully light hence did not even draw 600 watts. The calculations were done incorrectly by Dave. He used Volts peak-to-peak X Amps peak-to-peak. Dave himself admitted his math skills is sharp as a wet spaghetti. [link to www.allegedlydave.com]
As I showed earlier, doing the same erroneous calculation on a 100 watt light bulb would result close to 800 watts. Do you think a 100 watt light bulb draws 800 watts?

[link to www.youtube.com]

Just donated 20 bucks and figured this could use a bump..

YES!!! ^^^

Pics or you did not donate.

I donated 20 bucks a month or two ago. BUMP. New updates on the fix the world site and a new video on CICU certification. Someone please embed.

[link to www.youtube.com (secure)]

When its year 2024, tell me why those making the claim will still be using mains LOL!!!!!!!!!!!!!!!!111

The new age of free energy SCAMS is here.

Fixed that for you.

70%something down

Free energy will come to the people for free you dumbasses.


If you donated money, you're an idiot.