Godlike Productions - Discussion Forum
Users Online Now: 1,218 (Who's On?)Visitors Today: 360,344
Pageviews Today: 543,492Threads Today: 204Posts Today: 2,630
06:21 AM


Rate this Thread

Absolute BS Crap Reasonable Nice Amazing
 

How to make Anti Gravity Craft

 
-a
User ID: 72848309
United States
10/23/2019 12:17 PM
Report Abusive Post
Report Copyright Violation
How to make Anti Gravity Craft
DC electrical brush ( the electrical discharge off of copper wire) lifts the craft up.
Here is proof of concept showing DC levitation
[link to en.m.wikipedia.org (secure)]
AC electrical brush goes on the bottom of the craft to complete the magnetic flux circuit.
Here is a proof of concept showing alternating current levitating objects
[link to en.m.wikipedia.org (secure)]

So Tesla invented this in the early 1900s and even wrote New York Times articles about it.
Where people have gone wrong is not combining the AC/DC together in the same unit. This is because most people have never studied Aether. (Which is a discharge of electrical energy that is not visible to the human eye.) Aether is expanded by DC charge and compacted by AC charge.

THE biggest deception to the entire world and America was hiding the science of Aether. Which is a natural phenomenon of electrical discharge. Combining AC and DC current brush’ on the outside of a craft will nullify gravity via electricity.( primarily the capturing of Aether which flows through all objects unless those objects are surrounded in a AC/DC magnetic flux.
Anonymous Coward (OP)
User ID: 72848309
United States
10/23/2019 12:20 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
A craft that could lift a man and fly at 100mph could be made for less than 1k usd. Don’t ask me for videos because you will not get one. Plenty have been uploaded to YouTube over the ages only to disappear along with their creators. However this info is very true and shows just how simple of a world we live in.
Anonymous Coward
User ID: 78081005
United States
10/23/2019 12:36 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Was totally banned for posting this. Lame and of course it was as I was posting how I found this out in my garage
Neil WeakLegs
User ID: 77374862
United States
10/23/2019 01:03 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Are you just talking about ionization?
Anonymous Coward
User ID: 78081005
United States
10/23/2019 01:10 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Are you just talking about ionization?
 Quoting: Neil WeakLegs 77374862


That is half the equation Ionization is from DC power it’s what they call a lifter, I am saying that if you also add AC current to that lifter you now have a ufo and complete system. Ionization is what they use in hobby lifters but since no AC current is present the lift is weak. AC current locks in Aether and DC current pulls the Aether. One does not work well without the other.
Anonymous Coward
User ID: 78081005
United States
10/23/2019 01:14 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
A simple test proves this to be true.
1 box wooden
Copper coils flat in a circle on top and on bottom
Hook DC power source to top 12v
Hook Ac 120v to a 6 prong extender attach to bottom coils^ , (make sure you’re Breaker is gfci so it will flip off)
turn on power
Box will jump 6 feet in the air and flip the breaker slamming down
Anonymous Coward
User ID: 78081005
United States
10/23/2019 01:32 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Tired of the TSA step up and make you’re own ufo!
Anonymous Coward
User ID: 78081005
United States
10/23/2019 01:38 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
[link to www.bibliotecapleyades.net (secure)]


I’m not the biggest fan of Biblio but this is the article I read 10 years ago that inspired me to test this in my garage. It worked
Anonymous Coward
User ID: 77992195
United States
10/23/2019 01:44 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Now if someone would only invent a time machine that doesn't require a flux capacitor.
Anonymous Coward
User ID: 78081005
United States
10/23/2019 01:44 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Now if someone would only invent a time machine that doesn't require a flux capacitor.
 Quoting: Anonymous Coward 77992195


Time machines where created using this technology. Ask Area 51
Anonymous Coward
User ID: 78081005
United States
10/23/2019 01:58 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Keep in mind that EVERY car has a Alternator for AC and battery’s for DC cars are pretty much Anti Gravity vehicles we just don’t have them set up as such. And that is the thing that makes me mad. We have been sitting still for 100 years in technology advancement Because some black hats killed Tesla
Neil WeakLegs
User ID: 69682309
United States
10/23/2019 02:12 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Are you just talking about ionization?
 Quoting: Neil WeakLegs 77374862


That is half the equation Ionization is from DC power it’s what they call a lifter, I am saying that if you also add AC current to that lifter you now have a ufo and complete system. Ionization is what they use in hobby lifters but since no AC current is present the lift is weak. AC current locks in Aether and DC current pulls the Aether. One does not work well without the other.
 Quoting: Anonymous Coward 78081005


What about the device with two cones placed back to back with spiral coils on each cone? Tesla made it and the rumor is that it had A/G effect.
Anonymous Coward
User ID: 78081005
United States
10/23/2019 02:14 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Are you just talking about ionization?
 Quoting: Neil WeakLegs 77374862


That is half the equation Ionization is from DC power it’s what they call a lifter, I am saying that if you also add AC current to that lifter you now have a ufo and complete system. Ionization is what they use in hobby lifters but since no AC current is present the lift is weak. AC current locks in Aether and DC current pulls the Aether. One does not work well without the other.
 Quoting: Anonymous Coward 78081005


What about the device with two cones placed back to back with spiral coils on each cone? Tesla made it and the rumor is that it had A/G effect.
 Quoting: Neil WeakLegs 69682309


Smart man!!! That’s his first experiment on Aether .

One cone. Wrapped in copper coil .
DC high voltage attached to one side
AC attached to the other and it floats in the air
Deplorableduckhunter

User ID: 76470186
United States
10/23/2019 02:14 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Like this?

ufo98673


Seriously.

Is that why those old picture tube assembles in the TVs from my childhood would jump when the voltage would hit them?

Would it be that the voltage would build up in the power supply coil first. Then when the relay kicked in, it would be A/C that acted like D/C for a split instant as the power saturated the tube coils?

I distinctly remember that and I would wonder why. I was young, but old enough to know that it was not a motor and it had no business jumping like that.

Then I started trying to figure out what came down at Roswell a few years back. I came across the public part of Townsend Brown's work. It floored me... Apparently he was a teen about the same time and wondered the same thing. Only a heck of a lot smarter than me (which isn't saying much)

Last Edited by Deplorableduckhunter on 10/23/2019 02:41 PM
Anonymous Coward
User ID: 78081005
United States
10/23/2019 02:16 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Are you just talking about ionization?
 Quoting: Neil WeakLegs 77374862


That is half the equation Ionization is from DC power it’s what they call a lifter, I am saying that if you also add AC current to that lifter you now have a ufo and complete system. Ionization is what they use in hobby lifters but since no AC current is present the lift is weak. AC current locks in Aether and DC current pulls the Aether. One does not work well without the other.
 Quoting: Anonymous Coward 78081005


What about the device with two cones placed back to back with spiral coils on each cone? Tesla made it and the rumor is that it had A/G effect.
 Quoting: Neil WeakLegs 69682309


Ugh YES one person is all I need and of course you will need to tell 3 people. But you are starting to get it. THIS SHIT IS HUGE but sooo simple
Every car in the world could be a anti gravity craft
Anonymous Coward
User ID: 78081005
United States
10/23/2019 02:18 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft

If you connect the 120 clip to a penny and place it under your tongue, then stand near the box, your entire body will phase right through a portal into the next dimension. Just make sure the breaker is working so your survivors don't need to worry about replacing it while they are planning your final arrangements.
[/s

Try harder troll
Look you and I both know you can do anything unless I break the rules
 Quoting: Anonymous Coward 69766872


Lol meant can’t but in any case
Anonymous Coward
User ID: 78081005
United States
10/23/2019 04:43 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
So this is such eye opening and mind blowing science that is sooo simple yet completely un tested by non secrete society scientists. I feel like a pleb bumping my own thread but every person who reads this is a new mind I am opening. Sooo many incredibly smart people on this forum.
Anonymous Coward
User ID: 78081005
United States
10/23/2019 04:47 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Like this?

:ufo98673:


Seriously.

Is that why those old picture tube assembles in the TVs from my childhood would jump when the voltage would hit them?

Would it be that the voltage would build up in the power supply coil first. Then when the relay kicked in, it would be A/C that acted like D/C for a split instant as the power saturated the tube coils?

I distinctly remember that and I would wonder why. I was young, but old enough to know that it was not a motor and it had no business jumping like that.

Then I started trying to figure out what came down at Roswell a few years back. I came across the public part of Townsend Brown's work. It floored me... Apparently he was a teen about the same time and wondered the same thing. Only a heck of a lot smarter than me (which isn't saying much)
 Quoting: Deplorableduckhunter


It’s people like you that I wish to speak too. I have known this info for along time and I have tested it and it does work. This entire thread and others I have posted in relation could get me in a lot of trouble but I walk the line without proof which I will never show.
Neil WeakLegs
User ID: 77668649
United States
10/23/2019 11:15 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Are you just talking about ionization?
 Quoting: Neil WeakLegs 77374862


That is half the equation Ionization is from DC power it’s what they call a lifter, I am saying that if you also add AC current to that lifter you now have a ufo and complete system. Ionization is what they use in hobby lifters but since no AC current is present the lift is weak. AC current locks in Aether and DC current pulls the Aether. One does not work well without the other.
 Quoting: Anonymous Coward 78081005


What about the device with two cones placed back to back with spiral coils on each cone? Tesla made it and the rumor is that it had A/G effect.
 Quoting: Neil WeakLegs 69682309


Smart man!!! That’s his first experiment on Aether .

One cone. Wrapped in copper coil .
DC high voltage attached to one side
AC attached to the other and it floats in the air
 Quoting: Anonymous Coward 78081005


But there is no discharge ("brush") with the coils, is there?
Anonymous Coward
User ID: 78107514
Sweden
10/23/2019 11:21 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Keep it going, guys.
I'm proud of you.
hf
Deplorableduckhunter

User ID: 77974906
United States
10/23/2019 11:41 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Now if someone would only invent a time machine that doesn't require a flux capacitor.
 Quoting: Anonymous Coward 77992195


Easy to come by, O'reillys Auto Parts carries them..

[link to www.oreillyauto.com (secure)]
Anonymous Coward
User ID: 10724289
United States
10/23/2019 11:44 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
I have...Ingenious design. Some call it a pool float.
With it, I float on water without gravity bringing me down.
Anonymous Coward
User ID: 76869839
United States
10/23/2019 11:56 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
A simple test proves this to be true.
1 box wooden
Copper coils flat in a circle on top and on bottom
Hook DC power source to top 12v
Hook Ac 120v to a 6 prong extender attach to bottom coils^ , (make sure you’re Breaker is gfci so it will flip off)
turn on power
Box will jump 6 feet in the air and flip the breaker slamming down
 Quoting: Anonymous Coward 78081005


what is a 6 prong extender?

was the box on top of a steel table or steel surface of any kind?

sounds like an electromagnetic effect.
Neil WeakLegs
User ID: 77668649
United States
10/24/2019 12:12 AM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
A simple test proves this to be true.
1 box wooden
Copper coils flat in a circle on top and on bottom
Hook DC power source to top 12v
Hook Ac 120v to a 6 prong extender attach to bottom coils^ , (make sure you’re Breaker is gfci so it will flip off)
turn on power
Box will jump 6 feet in the air and flip the breaker slamming down
 Quoting: Anonymous Coward 78081005


what is a 6 prong extender?

was the box on top of a steel table or steel surface of any kind?

sounds like an electromagnetic effect.
 Quoting: Anonymous Coward 76869839


"6 prong extender": He means a multiple outlet power strip with a shutoff switch/breaker.
Anonymous Coward
User ID: 76869839
United States
10/24/2019 12:22 AM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
A simple test proves this to be true.
1 box wooden
Copper coils flat in a circle on top and on bottom
Hook DC power source to top 12v
Hook Ac 120v to a 6 prong extender attach to bottom coils^ , (make sure you’re Breaker is gfci so it will flip off)
turn on power
Box will jump 6 feet in the air and flip the breaker slamming down
 Quoting: Anonymous Coward 78081005


what is a 6 prong extender?

was the box on top of a steel table or steel surface of any kind?

sounds like an electromagnetic effect.
 Quoting: Anonymous Coward 76869839


"6 prong extender": He means a multiple outlet power strip with a shutoff switch/breaker.
 Quoting: Neil WeakLegs 77668649


thanks

The more thought I give to this idea the more it sounds like a polarized magnetic field being generated by the bottom coil which is the same as the magnetic field from the top coil. It may be nothing to do with the Aether but instead an unknown magnetic repulsion effect.

I would like it to involve he Aether because that opens up a field of study which would revolutionize everything in every science.
Neil WeakLegs
User ID: 54242617
United States
10/24/2019 06:29 AM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
A simple test proves this to be true.
1 box wooden
Copper coils flat in a circle on top and on bottom
Hook DC power source to top 12v
Hook Ac 120v to a 6 prong extender attach to bottom coils^ , (make sure you’re Breaker is gfci so it will flip off)
turn on power
Box will jump 6 feet in the air and flip the breaker slamming down
 Quoting: Anonymous Coward 78081005


what is a 6 prong extender?

was the box on top of a steel table or steel surface of any kind?

sounds like an electromagnetic effect.
 Quoting: Anonymous Coward 76869839


"6 prong extender": He means a multiple outlet power strip with a shutoff switch/breaker.
 Quoting: Neil WeakLegs 77668649


thanks

The more thought I give to this idea the more it sounds like a polarized magnetic field being generated by the bottom coil which is the same as the magnetic field from the top coil. It may be nothing to do with the Aether but instead an unknown magnetic repulsion effect.

I would like it to involve he Aether because that opens up a field of study which would revolutionize everything in every science.
 Quoting: Anonymous Coward 76869839


Magnetic fields involve the Æther. All of the "action at a distance" phenomenon occur because of pressure mediation of the Æther.

(The top dogs in industry/military know this and so around the 1920s they have worked to suppress research on the Æther and to promote the nonsense of QM instead. Since QM is a dead end, it preserves the dominance of the petroleum industry, etc.)

It seemse like the AC coil creates a disturbance in the Æther, and the DC coil focuses that disturbance to a particular direction.

(You need to make a disturbance in the Æther because a disturbance is the only way in which the Æther becomes detectable. Light and magnetic fields are examples of disturbances in the Æther.)
Anonymous Coward
User ID: 52268019
Canada
10/24/2019 07:24 AM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
...


what is a 6 prong extender?

was the box on top of a steel table or steel surface of any kind?

sounds like an electromagnetic effect.
 Quoting: Anonymous Coward 76869839


"6 prong extender": He means a multiple outlet power strip with a shutoff switch/breaker.
 Quoting: Neil WeakLegs 77668649


thanks

The more thought I give to this idea the more it sounds like a polarized magnetic field being generated by the bottom coil which is the same as the magnetic field from the top coil. It may be nothing to do with the Aether but instead an unknown magnetic repulsion effect.

I would like it to involve he Aether because that opens up a field of study which would revolutionize everything in every science.
 Quoting: Anonymous Coward 76869839


Magnetic fields involve the Æther. All of the "action at a distance" phenomenon occur because of pressure mediation of the Æther.

(The top dogs in industry/military know this and so around the 1920s they have worked to suppress research on the Æther and to promote the nonsense of QM instead. Since QM is a dead end, it preserves the dominance of the petroleum industry, etc.)

It seemse like the AC coil creates a disturbance in the Æther, and the DC coil focuses that disturbance to a particular direction.

(You need to make a disturbance in the Æther because a disturbance is the only way in which the Æther becomes detectable. Light and magnetic fields are examples of disturbances in the Æther.)
 Quoting: Neil WeakLegs 54242617


DC is King! Ac was only developed to assist in transmission of energy so you are right.
Anonymous Coward
User ID: 76789384
United States
10/24/2019 11:34 AM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
So how high could somebody take one of these things?

Will it bounce off the dome or does it get lost in space?
Anonymous Coward
User ID: 78081005
United States
11/10/2019 01:52 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Bump
Anonymous Coward
User ID: 78081005
United States
11/10/2019 02:02 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
...


what is a 6 prong extender?

was the box on top of a steel table or steel surface of any kind?

sounds like an electromagnetic effect.
 Quoting: Anonymous Coward 76869839


"6 prong extender": He means a multiple outlet power strip with a shutoff switch/breaker.
 Quoting: Neil WeakLegs 77668649


thanks

The more thought I give to this idea the more it sounds like a polarized magnetic field being generated by the bottom coil which is the same as the magnetic field from the top coil. It may be nothing to do with the Aether but instead an unknown magnetic repulsion effect.

I would like it to involve he Aether because that opens up a field of study which would revolutionize everything in every science.
 Quoting: Anonymous Coward 76869839


Magnetic fields involve the Æther. All of the "action at a distance" phenomenon occur because of pressure mediation of the Æther.

(The top dogs in industry/military know this and so around the 1920s they have worked to suppress research on the Æther and to promote the nonsense of QM instead. Since QM is a dead end, it preserves the dominance of the petroleum industry, etc.)

It seemse like the AC coil creates a disturbance in the Æther, and the DC coil focuses that disturbance to a particular direction.

(You need to make a disturbance in the Æther because a disturbance is the only way in which the Æther becomes detectable. Light and magnetic fields are examples of disturbances in the Æther.)
 Quoting: Neil WeakLegs 54242617


It is people such as your self that give me hope! You can read without belief and make you’re own opinion. Anther is the key to all future technology and you are completely right they invented the word quantum to send man down a half lit path with the wrong info.
Anonymous Coward
User ID: 78081005
United States
11/10/2019 02:50 PM
Report Abusive Post
Report Copyright Violation
Re: How to make Anti Gravity Craft
Even if you don’t believe this thread it is super important that you know the basics of Aether. There will come a day when the TPTB pull the plug, there will be no more Wikipedia or glp or a place to research only what you knew before will be with you. Learn how to fly, learn how to turn any car into a flying craft and even if shtf you can live free in this world. I have yet to develope a Aether electric motor but it is my next step after completing my 4 Aether engines for my flying vehicle.





GLP