giant tesla pyramid forming guess where on haarp

wtf does this mean?

Tesla, through his experiments, discovered that the most efficient way to make his coils was to wind them in a conical shape, large at the bottom and small at the top where the most voltage is produced. This architecture allowed for the greatest number of turns to be placed within the shape of the magnetic field being created by the primary at the base of the coil, away from the high voltage.

The most efficient shape to produce a focused electric field in order to create an ionized beam that would be used as not just an antenna but as a conductor to the ionosphere, is that of the pyramid. A conical shape would also work but when building a large structure out of available materials then the pyramid shape wins out. Not just any pyramid shape but one that has the exact shape as the great pyramid at Giza.

The pyramid then meets the requirements of both electrical field focusing and that of a coil form for a large Tesla type coil. When activated, it could not only produce an ionized beam off its top thereby creating a very tall antenna but would in total create a fairly efficient transmitting device. All you would need is enough locally continuously generated power to make it work, or would you?

If the pyramid were made large enough and at least for a short time you could generate enough power then you could make the ionized beam reach all the way to the ionosphere. Imagine a temporary conductive path to the ionosphere. Remember what I said about the spherical capacitor that exists between Earth and the ionosphere being highly electrically charged? Once the path is created then the large amount of electrical energy stored between the plates of Earth and the ionosphere has a way to discharge. What would be created is one very large lightning strike yielding many times the power that was required to create the temporary path. Also imagine the size of the electromagnetic wave that would be sent around the planet once that opening was made.

Once the local ionospheric energy storage level is depleted then the path would not have enough energy to remain ionized and it would close. The rest of the ionosphere would then restore the local ionospheric charge. The process could be repeated again at the appropriate moment and a standing wave would be created. This would not only supply power locally but for miles around and on the opposite side of the planet as well.

The construction of such a pyramid would require a way for the wire of the coil to be placed on its outside. Steps would provide a shelf for the wire, which would be continuous from bottom to top. The wire would need to be in a spiral much like a thread on a screw. If you were to walk around the pyramid at some level above ground then when you completed the circuit you would be one step higher than when you started. It is assumed that the great pyramid at Giza in Egypt is constructed in level layers but I’m not sure that measurement has been accurately made. High quality photographs from many angles would be required to prove or disprove this hypothesis.

The outside of the pyramid would then have to be covered by some sort of insulative material and sealed to keep water from entering the area of the wires. This would also prevent the air around the wires from becoming ionized thereby preventing leakage paths for the high voltage generated between the wires on adjacent steps. The pyramid at Giza originally had alabaster covering it.

The top of the pyramid would require a large copper capstone in order to handle the immense electrical current produced by the resulting ionospheric lightning. Stories persist about a copper capstone on top of the great pyramid at Giza.

Ionizing the atmosphere can also be aided by the use of focused sunlight. One way to do this would be to surround the pyramid with mirrors that would reflect the sunlight onto the pyramid’s top where a prism made out of a specially shaped crystal would be placed. The crystal would then focus the intensified light into a column aimed skyward. There are mythological stories about a crystal that set on top of the great pyramid. I have another theory about the crystal, which I will discuss at another time. The copper capstone could, however, be used as a secondary mirror for the same purpose as a crystal. It would shin very brightly as the sunlight is focused up to it.

An electrical counter pole would be required. One way to accomplish this would be to dig a well and fill it with salt water. The water level would have to be high enough to connect to the base of the Tesla coil wound on the outside of the pyramid. Such a well exists below the great pyramid and the lower chambers have a thick layer of salt that has been electroplated to the walls.

A way would be needed to initialize the electrical pulse. Christopher Dunn in his book The Power Plants of Giza suggests that hydrogen gas was generated chemically in the Queen’s chamber and vented into the King’s chamber where it was ignited. The resulting explosion exercised the piezoelectric qualities of the special granite stones used to construct the Kings chamber and electricity was produced, at least a single pulse. That is all that would be needed in the above scenario.

A self-sustaining thermal-acoustical oscillator could be created to replenish the king’s chamber with fresh fuel. Tuning this oscillator could be accomplished by varying the position of a slug in an adjacent chamber that is acoustically connected to the king’s chamber. The grand gallery in the Great Pyramid could have provided that function. This could possible explain the cog holes located in the base of the grand gallery.

Once such a pyramid as described above was in operation then large amounts of electrical power could be made available locally. If, on the opposite pole of the planet, another similar pyramid was constructed then one could act as a transmitter and the other as a receiver. The one in the sunlight would have the best conditions to transmit energy to the other. Remember, a wave peak or maximum is created at both electrical poles when either pyramid is in operation. This would allow the pyramid in the dark to be aided in creating the necessary electrical stress to cause the atmosphere to break down and receive energy from the ionosphere. As Tesla showed, however, that energy could be received without ionizing the air at the receive site. All that would be required would be receiving apparatus tuned to the transmitter frequency and be within the near-field of the transmitter. This should also apply to a location near the opposite electrical pole on Earth from the transmitter.

If a number of pyramids were built around the planet, at least one or more would be in daylight at any given time. Two or more could be synchronized in their transmissions to provide a continuous wave of energy traveling around the planet. This could provide power for most of Earth for a good distance from the magnetic equator.

The pyramids would be operating at some harmonic of Earth resonance. This harmonic would have to be selected to be most beneficial to living organisms on the planet. If it were not properly selected then the effects of the energy could and most likely would be detrimental. Selecting a beneficial frequency would allow for the stimulation of all living beings on the planet. Such a frequency would stimulate growth and healing of both the physical organism and consciousness. Such energy could also be used as a control mechanism. If it were at a certain frequency then the organism would remain stagnate and not be allowed to automatically move to a higher state of consciousness. Even after the system had discontinued operation the reverberations of this frequency would remain in the DNA consciousness of the organism and its succeeding generations.

[link to www.highdesertshaman.com]

"The scanned image of the Hardy1.GIF file shows something quite fascinating with regard to such a comparison of the Ark (Tesla Coil) placed in a pyramid structure to produce this Double Helix spiralling energy emanating from the tip.

The original photo was taken by Dr. J.D. Nelson of the University of Wyoming. From the limited information we have concerning how it was done, the pyramid shape is made of soldered copper sheet, possibly with a crystal placed at the apex...."


photo....

[link to keelynet.com]

more info....

[link to keelynet.com]

dna changes also with chemtrails

Interesting.
Consider: the sun is indulging in its explosive maximum; if a charge were to build up in the ionosphere, when released the bolt would seek an energy source. Would it be better to direct it to a sparsely populated area or let it find a path to a nuclear reactor in a densely peopled region?

For a example of what happens when it is not directed see the Cayman Trench. Land a mile above the sea and six below, hundreds of mils across and over a thousand long vaporized. The survivors had generations of mutated children. The civilization began to practice eugenics to preserve themselves.

Did you never wonder why the chroniclers of North and South America marveled over and over again at the strength, health, fitness, physique of the natives?

wtf... how bout the sept pyramid .... with its suposive gold cap.... and destinctive seps to the top would not that have made a better coil .....????

could enough bagdad bateries make enough of a charge to run a coil of tht size