DEW Driven Cali Fires; Microwaves Can Turn Wood into Methane and H2 Gas | |
Pooka User ID: 36721404 United States 11/25/2018 01:20 AM Report Abusive Post Report Copyright Violation | I might have discovered the mechanism of how these fires spread so quickly. What got me thinking about this was one person's testimony about how the Camp Fire wasn't spread via burning embers. He talked about how his wood pile literally burst into flames with flames 20 feet tall within seconds. That is not natural, you need some kind of accelerant. People have talked about the aluminum from chem trails, and yes, aluminum can burn, but it's mainly an excellent conductor. Quoting: Crypto-Tard Spray everything with aluminum chemtrails, make sure it's good and dry with a Santa Ana wind (HAARP that weather), then microwave the wood with DEW to turn it into a blast furnace with methane and hydrogen gas, released from the wood by beamed microwaves. As long as they run the microwave beams just in front of the flames, it'll be a monster fire that "no one has seen the likes of before". There is a bit of scientific literature of treating wood with microwaves I found (less than 50%): The use of microwave (MW) technology is growing in all industries. This increased use has resulted from the high efficiency of converting electricity into MW energy; energy savings associated with rapid, in-depth heating of materials; specific interactions that can be achieved between MW energy and materials; radical acceleration of technological processes; reductions in MW equipment costs; and improvements in the reliability of industrial MW equipment. The new technology of MW wood modification is based on the supply of high-intensity MW power, up to 135,000 kW/m3 at frequencies of 0.922 and 2.45 GHz. Such power induces significant changes to the microstructure of wood and a dramatic increase in wood permeability. [link to www.researchgate.net (secure)] Another citation here (link follows): By using microwave pyrolysis, almost half of lignocellulosic biomass can be converted into gas product, which is mainly composed of H2, CH4, CO, and CO2, with more bioenergy because of its high H2 and CO yields. The addition of proper catalysts provides substantial influence on the product selectivity of microwave pyrolysis. The gas and liquid yields as well as the heating performance of microwave pyrolysis can be dramatically promoted by adding catalysts. [link to www.sciencedirect.com (secure)] Five stars for very impressive research! Prayer is the most powerful force on earth. “I care not for a man's religion whose dog and cat are not the better for it.” Abraham Lincoln I sign all karma given. Would that those giving it to me followed suit. |
Anonymous Coward User ID: 77064257 United States 11/25/2018 01:22 AM Report Abusive Post Report Copyright Violation | |
Crypto-Tard (OP) User ID: 76228968 United States 11/25/2018 01:26 AM Report Abusive Post Report Copyright Violation | Yes it does make composting of wood happen faster. That was what one of the papers was about and if you've ever tried to compost wood, you'll know it literally takes years or decades, naturally. However, when I noticed the gasses that are produced by microwaves....BINGO. That's how you get the fires rolling!! When you are afraid of losing your life, you have already lost your life. Don't be afraid. |
puchong User ID: 77148019 Malaysia 11/25/2018 01:29 AM Report Abusive Post Report Copyright Violation | |
Lance Roseman From BC User ID: 30616576 Canada 11/25/2018 01:36 AM Report Abusive Post Report Copyright Violation | Bumping to follow... If you are not busy weaving your own magick, you are trapped in anothers spell. “It’s time you realized that you have something in you more powerful and miraculous than the things that affect you and make you dance like a puppet.” – Marcus Aurelius |
Djibouti Military Intelligence User ID: 77022345 United States 11/25/2018 01:47 AM Report Abusive Post Report Copyright Violation | OP my old thread got shilled hard Thread: CLASSIFIED AERIAL DEW Weapons has always been used for most of the California Fires - MELTED ALUMINUM WHEELS! - need UNCLE INTEL please! i have always missed my romania___ |
Djibouti Military Intelligence User ID: 77022345 United States 11/25/2018 01:48 AM Report Abusive Post Report Copyright Violation | SPECIAL: California Fires, DEW Weapons UPDATE 15: Solaren Patent Sketches, Video Admissions consider Robert David Steele's work [link to phibetaiota.net (secure)] i have always missed my romania___ |
Anonymous Coward User ID: 76994111 United States 11/25/2018 01:55 AM Report Abusive Post Report Copyright Violation | |
SearchCopy&Destroy User ID: 69269121 United States 11/25/2018 02:11 AM Report Abusive Post Report Copyright Violation | |
Lance Roseman From BC User ID: 30616576 Canada 11/25/2018 09:11 AM Report Abusive Post Report Copyright Violation | sunday bump If you are not busy weaving your own magick, you are trapped in anothers spell. “It’s time you realized that you have something in you more powerful and miraculous than the things that affect you and make you dance like a puppet.” – Marcus Aurelius |
beeches User ID: 74276477 United States 11/25/2018 09:19 AM Report Abusive Post Report Copyright Violation | |
Halcyon Dayz User ID: 70077538 United States 11/25/2018 09:36 AM Report Abusive Post Report Copyright Violation | |
Lost Pottawatomie User ID: 72515589 United States 11/25/2018 09:59 AM Report Abusive Post Report Copyright Violation | Yep, heat up any carbon based stuff and you can drive out volatile flammable gases. Coke used in steelmaking is coal that has been heated by steam to drive off flammable gas used in the blast furnaces. Either focused microwave energy or a powerful laser could create such heat. The technology and design of smart meters is unbelievably dangerous. Too cheaply built, and subject to fire for many reasons, number one being the contactor which can overheat, number 2 being electronic parts subject to failure due to line spikes in voltage. I have watched capacitors on 480 v drives suddenly burst forth with smoke... I have seen caps short and watched resistors flame out. There's a good reason the old spinning disc meter was used. It was above all, SAFE. Giwani-Mek Translates as: Wandering Beaver Nothing shall be so certain as to permit confusion |
Torchie User ID: 74276477 United States 11/25/2018 10:04 AM Report Abusive Post Report Copyright Violation | Yep, heat up any carbon based stuff and you can drive out volatile flammable gases. Quoting: Lost Pottawatomie Coke used in steelmaking is coal that has been heated by steam to drive off flammable gas used in the blast furnaces. Either focused microwave energy or a powerful laser could create such heat. The technology and design of smart meters is unbelievably dangerous. Too cheaply built, and subject to fire for many reasons, number one being the contactor which can overheat, number 2 being electronic parts subject to failure due to line spikes in voltage. I have watched capacitors on 480 v drives suddenly burst forth with smoke... I have seen caps short and watched resistors flame out. There's a good reason the old spinning disc meter was used. It was above all, SAFE. thanks for this post untying the shoelaces of the internet one post at a time love tastes best from teal buckets go GIT in your STALL! a Spark does not fall far from the Torchie |
Works4Me User ID: 69365202 United States 11/25/2018 10:06 AM Report Abusive Post Report Copyright Violation | |
Scribbler User ID: 76338417 United States 11/25/2018 10:18 AM Report Abusive Post Report Copyright Violation | |
Lost Pottawatomie User ID: 72515589 United States 11/25/2018 10:26 AM Report Abusive Post Report Copyright Violation | Another possible electrical issue could have been low voltage, and houses with AC running might have had overheating in the meter's contactor due to higher current...the load draws, or tries to develop the same power, but at a lower voltage, current goes UP to do so, and things like compressors often are ruined. But the heat at the contactor in the smart meter will be greater than it should be, and then fire can start in the meter. Giwani-Mek Translates as: Wandering Beaver Nothing shall be so certain as to permit confusion |
The Natural One User ID: 73776183 United States 11/25/2018 11:49 AM Report Abusive Post Report Copyright Violation | |
MAVERICKANDGOOSE User ID: 45817962 United States 11/25/2018 11:50 AM Report Abusive Post Report Copyright Violation | I might have discovered the mechanism of how these fires spread so quickly. What got me thinking about this was one person's testimony about how the Camp Fire wasn't spread via burning embers. He talked about how his wood pile literally burst into flames with flames 20 feet tall within seconds. That is not natural, you need some kind of accelerant. People have talked about the aluminum from chem trails, and yes, aluminum can burn, but it's mainly an excellent conductor. Quoting: Crypto-Tard Spray everything with aluminum chemtrails, make sure it's good and dry with a Santa Ana wind (HAARP that weather), then microwave the wood with DEW to turn it into a blast furnace with methane and hydrogen gas, released from the wood by beamed microwaves. As long as they run the microwave beams just in front of the flames, it'll be a monster fire that "no one has seen the likes of before". There is a bit of scientific literature of treating wood with microwaves I found (less than 50%): The use of microwave (MW) technology is growing in all industries. This increased use has resulted from the high efficiency of converting electricity into MW energy; energy savings associated with rapid, in-depth heating of materials; specific interactions that can be achieved between MW energy and materials; radical acceleration of technological processes; reductions in MW equipment costs; and improvements in the reliability of industrial MW equipment. The new technology of MW wood modification is based on the supply of high-intensity MW power, up to 135,000 kW/m3 at frequencies of 0.922 and 2.45 GHz. Such power induces significant changes to the microstructure of wood and a dramatic increase in wood permeability. [link to www.researchgate.net (secure)] Another citation here (link follows): By using microwave pyrolysis, almost half of lignocellulosic biomass can be converted into gas product, which is mainly composed of H2, CH4, CO, and CO2, with more bioenergy because of its high H2 and CO yields. The addition of proper catalysts provides substantial influence on the product selectivity of microwave pyrolysis. The gas and liquid yields as well as the heating performance of microwave pyrolysis can be dramatically promoted by adding catalysts. [link to www.sciencedirect.com (secure)] I’ve never seen more mental health problems in a post than this one. Dude, get some help. |
Free me User ID: 68769936 United States 11/25/2018 11:59 AM Report Abusive Post Report Copyright Violation | |
Anonymous Coward User ID: 77064257 United States 11/25/2018 12:22 PM Report Abusive Post Report Copyright Violation | |
FlashBuzzkill User ID: 75251329 United States 11/25/2018 12:32 PM Report Abusive Post Report Copyright Violation | Escaping gasses would explain the high winds and the fast spreading of the fire since there was no other source for wind than the fire itself. it would also explain the complete combustion of all materials within the targeted areas. Gen. John B Gordon and Gen. Nathan Bedford Forrest were the finest citizen-soldiers birthed in America. |
Anonymous Coward User ID: 77064257 United States 11/25/2018 12:39 PM Report Abusive Post Report Copyright Violation | Yes it does make composting of wood happen faster. That was what one of the papers was about and if you've ever tried to compost wood, you'll know it literally takes years or decades, naturally. Quoting: Crypto-Tard However, when I noticed the gasses that are produced by microwaves....BINGO. That's how you get the fires rolling!! They may need to do that as a regular thing after Fukushima [link to www.popsci.com (secure)] "When scientists set out to study the phenomenon, they found that lingering radiation from the 1986 nuclear meltdown is stunting fungi and other microbes' ability to break down leaves in parts of the land that's most contaminated." Otherwise we will rapidly be neck deep in plant litter |
Nero the Zero User ID: 77071784 United States 11/25/2018 12:56 PM Report Abusive Post Report Copyright Violation | I might have discovered the mechanism of how these fires spread so quickly. What got me thinking about this was one person's testimony about how the Camp Fire wasn't spread via burning embers. He talked about how his wood pile literally burst into flames with flames 20 feet tall within seconds. That is not natural, you need some kind of accelerant. People have talked about the aluminum from chem trails, and yes, aluminum can burn, but it's mainly an excellent conductor. Quoting: Crypto-Tard Spray everything with aluminum chemtrails, make sure it's good and dry with a Santa Ana wind (HAARP that weather), then microwave the wood with DEW to turn it into a blast furnace with methane and hydrogen gas, released from the wood by beamed microwaves. As long as they run the microwave beams just in front of the flames, it'll be a monster fire that "no one has seen the likes of before". There is a bit of scientific literature of treating wood with microwaves I found (less than 50%): The use of microwave (MW) technology is growing in all industries. This increased use has resulted from the high efficiency of converting electricity into MW energy; energy savings associated with rapid, in-depth heating of materials; specific interactions that can be achieved between MW energy and materials; radical acceleration of technological processes; reductions in MW equipment costs; and improvements in the reliability of industrial MW equipment. The new technology of MW wood modification is based on the supply of high-intensity MW power, up to 135,000 kW/m3 at frequencies of 0.922 and 2.45 GHz. Such power induces significant changes to the microstructure of wood and a dramatic increase in wood permeability. [link to www.researchgate.net (secure)] Another citation here (link follows): By using microwave pyrolysis, almost half of lignocellulosic biomass can be converted into gas product, which is mainly composed of H2, CH4, CO, and CO2, with more bioenergy because of its high H2 and CO yields. The addition of proper catalysts provides substantial influence on the product selectivity of microwave pyrolysis. The gas and liquid yields as well as the heating performance of microwave pyrolysis can be dramatically promoted by adding catalysts. [link to www.sciencedirect.com (secure)] One problem with your hypothesis OP, the trees are the only thing that DIDN'T burn. One idea I have, supported by multiple observed sources (and which may in fact be roughly aligned with your notion, I have mot really gone into HOW what I suggest is being accomplished) is that existent electrical infrastructure is being supper-heated. There were numerous images of old vehicles and log-cabin style houses that were 'miraculously spared' being claimed by fire, while a sea of newer vehicles and homes were all burned... then there was the first-hand report from the nurse who barely escaped death, as she told it on Fox news- at one point she got into a car with a woman and when she ultimately left, noticed she had 'burned a hole in the woman's nice new leather seats'. Shep even asked 'wait YOU burned a hole in her seat, how?" "I guess I had a hot ember on my back when I got in?" What do nice new leather seats have inside of them? -heaters. Aluminum has a high melting temp. as in about the top limit that a wood stove can reach internally when being stoked to reach max heat. Heat rises- WHY are the metal parts of the cars that are lowest and in contact with the ground, the parts that melt? "If one would have a friend, then one must also be willing to wage war for him: and in order to wage war, one must be capable of being an enemy." |
MAVERICKANDGOOSE User ID: 45817962 United States 11/25/2018 01:12 PM Report Abusive Post Report Copyright Violation | |
MAVERICKANDGOOSE User ID: 45817962 United States 11/25/2018 01:13 PM Report Abusive Post Report Copyright Violation | |
learn_the_truth666 User ID: 76662194 United States 11/25/2018 01:17 PM Report Abusive Post Report Copyright Violation | i have several microwave generators (magnetrons) from microwave ovens, and i discovered that pieces of wood with metal in it (i.e. houses with nails and screws holding them together, the metal heats so rapidly from the electromagnetic radiation that the wood bursts into flames within seconds! |
Crypto-Tard (OP) User ID: 76228968 United States 11/25/2018 01:40 PM Report Abusive Post Report Copyright Violation | I might have discovered the mechanism of how these fires spread so quickly. What got me thinking about this was one person's testimony about how the Camp Fire wasn't spread via burning embers. He talked about how his wood pile literally burst into flames with flames 20 feet tall within seconds. That is not natural, you need some kind of accelerant. People have talked about the aluminum from chem trails, and yes, aluminum can burn, but it's mainly an excellent conductor. Quoting: Crypto-Tard Spray everything with aluminum chemtrails, make sure it's good and dry with a Santa Ana wind (HAARP that weather), then microwave the wood with DEW to turn it into a blast furnace with methane and hydrogen gas, released from the wood by beamed microwaves. As long as they run the microwave beams just in front of the flames, it'll be a monster fire that "no one has seen the likes of before". There is a bit of scientific literature of treating wood with microwaves I found (less than 50%): The use of microwave (MW) technology is growing in all industries. This increased use has resulted from the high efficiency of converting electricity into MW energy; energy savings associated with rapid, in-depth heating of materials; specific interactions that can be achieved between MW energy and materials; radical acceleration of technological processes; reductions in MW equipment costs; and improvements in the reliability of industrial MW equipment. The new technology of MW wood modification is based on the supply of high-intensity MW power, up to 135,000 kW/m3 at frequencies of 0.922 and 2.45 GHz. Such power induces significant changes to the microstructure of wood and a dramatic increase in wood permeability. [link to www.researchgate.net (secure)] Another citation here (link follows): By using microwave pyrolysis, almost half of lignocellulosic biomass can be converted into gas product, which is mainly composed of H2, CH4, CO, and CO2, with more bioenergy because of its high H2 and CO yields. The addition of proper catalysts provides substantial influence on the product selectivity of microwave pyrolysis. The gas and liquid yields as well as the heating performance of microwave pyrolysis can be dramatically promoted by adding catalysts. [link to www.sciencedirect.com (secure)] One problem with your hypothesis OP, the trees are the only thing that DIDN'T burn. One idea I have, supported by multiple observed sources (and which may in fact be roughly aligned with your notion, I have mot really gone into HOW what I suggest is being accomplished) is that existent electrical infrastructure is being supper-heated. There were numerous images of old vehicles and log-cabin style houses that were 'miraculously spared' being claimed by fire, while a sea of newer vehicles and homes were all burned... then there was the first-hand report from the nurse who barely escaped death, as she told it on Fox news- at one point she got into a car with a woman and when she ultimately left, noticed she had 'burned a hole in the woman's nice new leather seats'. Shep even asked 'wait YOU burned a hole in her seat, how?" "I guess I had a hot ember on my back when I got in?" What do nice new leather seats have inside of them? -heaters. Aluminum has a high melting temp. as in about the top limit that a wood stove can reach internally when being stoked to reach max heat. Heat rises- WHY are the metal parts of the cars that are lowest and in contact with the ground, the parts that melt? Yes, I thought about that as well. Standing, live trees are full of water in their trunk and if the beam is coming from above, they won't present as much surface area. During dry weather, microwaves pass right through the needles. As for the electrical equipment and aluminum wheels, metal is a conductor and the microwave radiation is probably converted into electricity, turning it into an "arc welder" of sorts. This also explains why the plastic trash cans seem to miraculously make it through these fires, literally 20 feet away from melted aluminum wheels. Steel rebar inside of concrete is also a conductor. That might explain why the army corp was sent in to Santa Rosa to remove all the foundations. Hide the evidence. When you are afraid of losing your life, you have already lost your life. Don't be afraid. |
FlashBuzzkill User ID: 75251329 United States 11/25/2018 02:21 PM Report Abusive Post Report Copyright Violation | |
hotdogg User ID: 4448622 United States 11/25/2018 02:23 PM Report Abusive Post Report Copyright Violation | now, all you need to do is PROVE (or at least provide credible evidence) that contrails in the sky and aluminum in the soil (which happens to be a major component of Earth's crust) are somehow related. You need to get direct samples from the trails....and to date NO ONE has ever bothered to do this. Get the samples, and if there are nefarious chemicals in there...you'll be famous and rich beyond your wildest dreams...what are the chemtrailers afraid they might (not) find...? I don'r remember seeing any reports about aluminum powder/dust around the burn areas... |